Description

No more measuring! Just open the pack, introduce to boiling water, and add your lacrosse head. No need to add citric acid because it's already in there!

$3.99 base price for Brilliant Blue, Fire Red, Jet Black, Neon Pink, and Neon Volt. Additional $2, $4, or $6 for other colors (select color to see price).

***Always check your warranty before you dye your lacrosse head. Some lacrosse head manufacturers are OK with it, while others state it voids the warranty.

Directions:
1) Bring 2 gallons (7 liters) of water to a very light boil and keep it at this temperature the entire process (at least 212F/100C). Don't get it too far above boil or you will melt your lacrosse head and that's no fun. If you're using less water and a smaller pot, be sure to mix up your single shot well and use proportionally less dye mix.
2) Slowly and carefully add the LaxDip Single Shot packet to the dye bath. Stir with tongs until it's evenly distributed. LaxDip dye powder may clump during the shipping process, but it will not affect performance. If this occurs, simply mix into a small side container of room temperature water before introducing to the dye bath.
3) Add the lacrosse head to dye bath using tongs. The water is hot, so be careful. Leave it in the bath the dye bath until the desired shade is achieved. It will take just a few minutes for a deep color. See table above to see how time in the bath affects the dye.
4) Carefully remove the lacrosse head from the hot dye bath with tongs. Rinse the plastic in warm water to remove excess dye from the surface. Let the dye bath cool to room temperature before handling it.
5) Once cool, the dye bath may be saved and reused, or poured down the drain. The dye itself may fall out of solution, but it can be re-dissolved with a little heat.

Notes:
- It's very important that you keep this ratio of water-to-powder. If you use too little or too much water relative to the Single Shot pack, the pH will be off and you will get an undesirable color shift.
- There is a proper order for overlapping colors.
- Use a color wheel to help you combine LaxDip shades to make your own custom colors
- Our pros use tupperware and other plastic air-tight vessels to keep their dye for future use(s). Don't use metal containers because the acid in the dye bath will corrode them.


Is your powder not quite "powder" anymore when it arrived to you?
LaxDip dye powder may clump during the shipping process, but it will not affect performance. It may also absorb small amounts of moisture causing spotting within the plastic bag (this may require extra work getting it out of the bag). If this occurs, simply mix into a small side container of room temperature water before introducing to the dye bath.

LaxDip Dye V2 Single Shot Lacrosse Head Powder Dye

Rated 4.2 out of 5
19 Reviews
$3.99 to $9.99
0 available In Stock
This product has options that are out of stock. CLICK HERE to select an option and be notified when it is back in stock.
Brand: Other

Description

No more measuring! Just open the pack, introduce to boiling water, and add your lacrosse head. No need to add citric acid because it's already in there!

$3.99 base price for Brilliant Blue, Fire Red, Jet Black, Neon Pink, and Neon Volt. Additional $2, $4, or $6 for other colors (select color to see price).

***Always check your warranty before you dye your lacrosse head. Some lacrosse head manufacturers are OK with it, while others state it voids the warranty.

Directions:
1) Bring 2 gallons (7 liters) of water to a very light boil and keep it at this temperature the entire process (at least 212F/100C). Don't get it too far above boil or you will melt your lacrosse head and that's no fun. If you're using less water and a smaller pot, be sure to mix up your single shot well and use proportionally less dye mix.
2) Slowly and carefully add the LaxDip Single Shot packet to the dye bath. Stir with tongs until it's evenly distributed. LaxDip dye powder may clump during the shipping process, but it will not affect performance. If this occurs, simply mix into a small side container of room temperature water before introducing to the dye bath.
3) Add the lacrosse head to dye bath using tongs. The water is hot, so be careful. Leave it in the bath the dye bath until the desired shade is achieved. It will take just a few minutes for a deep color. See table above to see how time in the bath affects the dye.
4) Carefully remove the lacrosse head from the hot dye bath with tongs. Rinse the plastic in warm water to remove excess dye from the surface. Let the dye bath cool to room temperature before handling it.
5) Once cool, the dye bath may be saved and reused, or poured down the drain. The dye itself may fall out of solution, but it can be re-dissolved with a little heat.

Notes:
- It's very important that you keep this ratio of water-to-powder. If you use too little or too much water relative to the Single Shot pack, the pH will be off and you will get an undesirable color shift.
- There is a proper order for overlapping colors.
- Use a color wheel to help you combine LaxDip shades to make your own custom colors
- Our pros use tupperware and other plastic air-tight vessels to keep their dye for future use(s). Don't use metal containers because the acid in the dye bath will corrode them.


Is your powder not quite "powder" anymore when it arrived to you?
LaxDip dye powder may clump during the shipping process, but it will not affect performance. It may also absorb small amounts of moisture causing spotting within the plastic bag (this may require extra work getting it out of the bag). If this occurs, simply mix into a small side container of room temperature water before introducing to the dye bath.
average rating 4.2 out of 5
Based on 19 reviews
  • 5 Stars
    13 Reviews
  • 4 Stars
    1 Review
  • 3 Stars
    3 Reviews
  • 2 Stars
    0 Reviews
  • 1 Star
    2 Reviews
74% of reviewers would recommend this product to a friend
19 Reviews
Reviewed by Victoria S.
I recommend this product
Rated 5 out of 5
Review posted

This stuff is pretty amazing!

Works great! Colors are vibrant and deep. Easy enough process. Instructions could be included rather than looking them up but we figured it out! Such an improvement from how we use to dye sticks in the Good ''ole days ;)

Loading...
Was this helpful?
Reviewed by Michael S.
I recommend this product
Rated 5 out of 5
Review posted

Vibrant Good

Great product- easy to use - true color. Gold is not an easy color to get and this came out great!!

Loading...
Was this helpful?
Reviewed by craig v.
Rated 3 out of 5
Review posted

3 Stars

I would say for the price Rit is the better and easier solution except for black. I found the colors to be lighter than advertised especially the reds.

Loading...
Was this helpful?
Reviewed by Jon L.
I recommend this product
Rated 5 out of 5
Review posted

So easy to use

It’s easy, you should have no worries about not getting what you want in a dye. It works so fast I was shocked. Will be ordering again for sure!

Loading...
Was this helpful?
Reviewed by Guest S.
I recommend this product
Rated 5 out of 5
Review posted

5 Stars

If you’re going to the trouble of dying a lax head, do yourself a favor and use the good stuff!! Colors are true without a long soak. Laxdip is the best. Started out of a garage. Made for lacrosse.

Loading...
Was this helpful?

Recently

Viewed

Shopping Cart

Your cart is currently empty.