Brine 3x4 Lacrosse Lax Wall Rebounder Replacement Mat

Things I Liked:

Works great - glad someone came out w/ replacement wall. Really pleased with purchase. It took two of us to install new wall, but it wasn't difficult.

Things to Improve:

The packaging had been open before arrival. I can only assume it was a return. One spring was missing, but this did not pose a problem.

Full Review:

I would recommend this product to others.

LAX Mom - Centreville, MD - 8/3/2009

Things I Liked:

will let you know when i get it

Things to Improve:

will let you know when i get it

Full Review:

Brine was bought by New Balance (which also owns Warrior). I called Warrior directly to ask whether there was a specific Warrior replacement. They said there was not.
Their quote:
"The Brine rebounder did replace the Warrior style. Brine's mat will fit the Warrior's". I called my local Lacrosse shop and they said they had a tough time with 4 guys trying to get a replacement mat on. I noted this to Warrior and they said:
"It will still fit, but you need to buy 10 adapters for the bottom (3in available at any hardware store) They sent an image to me. The adaptor are your typical caribiners. They extend from the bottom springs to the bottom of the Mat.
I have not received this product yet but will update here. I'm taking the chance.

KR - New York - 12/11/2009

Things I Liked:

Although difficult to install because of the flaw noted below, it still works.

Things to Improve:

Quality Control - make sure it has enough spring grommets on the replacement mat for the number on the Lax Wall frame (14 down each side, 10 across the top & bottom).

Full Review:

Disappointed to find that the Replacement Mat did not have enough hooks for the number of springs that came off the original mat. The original mat had 1 hook for each spring on the frame (10 across the top & bottom, 14 down each side).
The replacement mat only had 12 hooks on each side. Very frustrating!!! Made the installation a real challenge and had to compromise by stretching the springs to holes on the frame that did not match up directly. Surprised Brine would not have better QC.

HoHoKus Laxers - HHK, NJ - 5/30/2010

Things I Liked:

Very easy to install.

Things to Improve:

None

Full Review:

Installation requires two individuals. Read the directions first.

LAX Coach - Tucson - 8/29/2011

Things I Liked:

Perfect fit - easy install.

Things to Improve:

Nothing

Full Review:

I didn't run into any of the problems the other reviewers had. Replaced a STX mat with the Brine, and it fit perfectly, everything lined up and it didn't even require two people.

denverbuff - Scottsdale, AZ - 1/12/2012

Things I Liked:

Quick service High quality mat Website suggests being creative if using other rebounders, and it was true - took some planning, but it worked.

Things to Improve:

Perhaps include more replacement springs

Full Review:

We had a very old Warrior frame - "taller" than Brine, so we had to use turnbuckle bolts at the top and bottom to "make up" the distance to the mat. You also have to be very clever about stretching the springs; we rigged up a type of "jack" to ratchet the spring to the rings on the mat.

Jake - Raleigh, NC - 6/21/2012

Things I Liked:

It's a nice workout getting the springs on, make sure to do it even or else it will get really difficult.

Things to Improve:

Maybe put more springs in the box.

Full Review:

more colors

Ken - Gainesville, Fl - 11/4/2012

Things I Liked:

Worked as advertised.

Things to Improve:

More springs. Had to reuse some that were pretty stretched. They semed to be OK.

Full Review:

Used on older brine frame that was larger. Side to side it fits fine. Top to bottom was 2 holes to many. Laced it correctly on top and 14 holes on sides leaving it about 5" short on the bottom. Used chain with a split link to make up the extra length. Rock solid now.

Ray - Livermore, Ca - 2/4/2013

Things I Liked:

Quality of rebounder material.

Things to Improve:

STX or someone needs to build a replacement mat to fit a STX frame.

Full Review:

Not as fortunate as other reviewer who got this to fit on STX frame. 2 people and tire jack needed to even get a few springs attached. Sheared off a spring, the spring streatch tool, and one of the mat metal rings. Going to see what can be done with some turnbuckles to salvage this.

John - San Diego, CA - 3/3/2013